Plunge Pool to Tumut NSW

People seem to fine us from all over Australia. Just recently an order came from our web page inquiry and sale made to the Tumut area in New South Wales. Early morning start for this delivery. Our client wanted in this rear yard and place in position. Spa City Spas was able to do this – using our crane truck trailer set-up -we did not have to use any local crane hire which saved a few hundred dollars. Our order was just for the swim Spa plunge pool.

Delivery and cost of product was around the $12,000.00 mark including GST. Below is an picture of the type of delivery to job.

Cranborne East Jazz 700 3 Crane Truck Over to Back yard

Jazz Plunge Pool Tralier  Trailer delivery to site

Spa City Spas will be able to help with costing budget figures for your project. Spa City Spas will always give you the very Best Prices available – this is one reason way be are so busy.

Why you should consider purchasing from Spa City Spas –  Call us for a Quote –
1 –  We Have been
in Business for over 30 Years.
2 – Family Business providing
Australian Made Products
3 – No commissions sales person  – you deal with the Business Owner directly. Husband and Wife team.
4 – We support Australian Made – Manufacturers and Suppliers
5 – Low overheads,no large advertising expense -therefore
better prices for our Clients.
6 – You will find us
Honest – Helpful – Caring.
7 – We will endeavour to offer
“The Best Prices in Town”

Kind regards
Michael Rae                  www.spacityspas.com
Spa City Spas        –           JAZZ Spas  Australia       

Showroom  –    30 Trade Place Vermont Vic 3133

Phone  03 9873 2555        Mobile   0418 533 902

Energy Saving Variable Speed Pumps

These new energy saving variable speed pump when used on your plunge pool or swimming pool will save you lots of dollars over the course of one year. Waterco’s new Hydrostorm ECO-V 100 or the Hydrostorm ECO-V 150 will slash energy use by up to 82%.

“Hydrostorm ECO-V Pumps

Energy Saving Variable 3 Speed Pump

Equipped with an energy saving Variable 3 speed motor, Hydrostorm ECO-V is capable of lowering its energy usage and reducing its operating noise levels.

  • Energy Rating of 8 Stars
  • Variable brushless DC motor
  • Energy savings of up to 82%
  • Ultra quiet operation

Energy Saving

A pool filtration system does not require to be operated at a pump’s maximum water flow rate as with the use of a conventional pool pump limited to one speed. In fact, your

pool’s filtration efficiency improves at lower flow rates.

As a pool’s filtration cycle occupies 99% of the run time of a pool pump, you can operate the Hydrostorm ECO-V on its low (ECO) speed setting for a majority of its running time, leading to a potential 82% savings in energy. Equipped with the very latest variable 3 speed permanent magnet brushless DC motor, Hydrostorm ECO-V is capable of lowering its motor speed, reducing water flow and lowering its energy consumption” Taken from Waterco Broachure

You can click on this link and watch a video information on the pumps.

http://www.waterco.com.au/component/virtuemart/details/236/90/pool-&-spa-products/pumps/energy-saving-pumps/hydrostorm-eco-variable-speed-pump

“Variable 3 Speed Options Lowering a pumps flow rate not only significantly decreases the pump’s energy requirements, but also reduces water flow resistance in your pool equipment and plumbing. Even though you may need to operate the Hydrostorm ECO-V longer, it is far more efficient pumping low water flow compared to high water flow. A slow flow rate also has the added benefit of improving your pool’s filtration efficiency, enhancing the clarity of your swimming pool water. Plus your automatic chemical dosers and salt chlorinators are also more effective when the pool water is circulated longer. Benefits of Slow Flow SLASH ENERGY USE BY UP TO 82%. Perfectly match flow requirements and maximis”

For further details and costing you may call us at Spa City Spas – call Michael on  0418 533 902

 

Plunge Pool and Swim Spa to Yarra Glen

This year Spa City Spas have noticed a big increase in our sales in the Plunge Pools and Swim Spas both local and country areas of to Victoria. Most of our clients have decided to go for either a 4 metre pool or the new 6 metre lap pool. Your cost for the plunge pool start from the $9990.00 price range plus your equipment this can vary a little depending on what you decide on. Some may use Gas heating, some Heat Pumps, some Solar, some Electric you have lots of options. Even your choose of jets to the pool your have a choice of options which Spa City Spas will advise you on during our discussions.

Spa City Spas and Jazz Spas Australia plunge pools will cost much less to install than a swimming pool. For budget figures you should allow from $22000.00 to maybe $30000.00 for your complete project. Your options and costing we can help you with. Your permit application Spa City will be able to assist you with. Building permits you should allow around the 4 weeks to be processed. You may need what we call an Owners builder approval – this is not at all difficult to obtain. Our permit people will arrange for you.

Installation quotes can be arranged for you.  Spa City Spas would normally do a site visit if necessary. All our Plunge Pools and swim Spas are made here in Melbourne. If you are planning to do one this year you will need to get a move on. We are currently very busy and as we get closer to December close down date I can see that we will be closing off our order most likely sometime in  October. So NOW is the time to order.

I have below one of our 6 metre pools you give you an idea what is possible –

Duel Zone - Plunge Pool and Spa 4

and another with granite surround positioned in a decking setup this has the Batu Swim Jets operation.

Swim Spa Granite finish 1

For more information and help please call Michael or Lilian on 0418 533 902. Showroom 30 Trade Place Vermont Victorian 3133

Portable Spa Pool delivery to Parkdale

Portable Spa Pools for the family home and holiday home.This was a easy access to the back yard for positioning of our portable spa pool. Our Seaview 15/20 model is our most popular seller. It is made here in Melbourne by our Manufacture who have being in business as long as Spa City Spas have now over 30 years. Spa City Spas Seaview portable is available ex stock unless we have a big run on SALES and you will have to wait till our new stock comes in. Our spas are electric powered using a standard power point 10 amp with 1.5 Kw heater. Led light available and with the Australian Made Edgetec stainless steel jets all adjustable. Davey Spa Power 400 controller unit – Australian well known Company. The control pad is digital and will heat to 40 Degrees. During the summer months you can run the spa pool at lower temperatures maybe as low as 22 degrees – through this may be a little to cold for us.

You may be interested to know that some of our clients use their spa 1 to 2 times a day. Spa City Spas recommend using a Chlorine or Bromine free sanitising system. Our Starter Kit we supply a Peroxsil 395 Kit Easy to use and great for the skin. 

You will notice in the picture that our client has made up a base using treated pine sleepers – cost only around $150.00.

This works out much cheaper than using concrete and is green friendly maybe! Normal base required for your portable spas are the following – Concrete base , Paving Slabs, Treated Pine Sleepers as shown in the pictures Crush rock and sand – but this requires some sort of finish, decking.

Specials from only $5700.00  Australian Made and delivery available to Australia Wide.

Parkdale delivery Seaview 15 20 1  Seaview Portable Spa – Stirling Marble finish

Parkdale delivery Seaview 15 20 2  Seaview portable spa – Slate Hard cover.

 

For more information and assistance please call Michael or Lilian on our contact numbers. Spa City Spas – Showroom 30 Trade Place Vermont Victoria 3133